Showing posts with label Comparative Study. Show all posts
Showing posts with label Comparative Study. Show all posts

Saturday, November 23, 2019


Thermal Video of Coated & Uncoated Surface.


Matrix Reflective Roofs deliver a much bigger, direct global cooling benefit. It reflects more solar energy back into space and absorb less solar energy as heat than an uncoated surface.


Monday, April 29, 2019



What if, your building is temporarily fixed?

*     Temporary fixing will break eventually
*     Widespread leakages will be anticipated between the sheets from dew formations during night
*     The Gutters will get clogged and slope occurs in the reverse direction which requires rectifications and Waterproofing treatment
*     Joint failure occurs and dust will get accumulate inside the gaps
*     Rust occurs beneath the temporary fixed areas and non-treated areas
*     Corrosion forms
*     The extreme temperature leads to future leakages / failures and further deterioration.
*     Deposition on corrosive sand in the joints
*     Formation of Urban heat island effect

*     Due to very destructive thermal shock; roof degradation, water leakage, thermal ageing from high heat loads and ultra violet penetration occurs

What if, your building is treated with Matrix Cool System?

MATRIX roof technology has reflective elastomeric coatings and is made with reflective surfaces. Both reflect sunlight and radiate heat into the atmosphere rather than retaining it where it can increase the temperature of buildings on Roof and wall.

It extends the life of the roof by another 10 years, saves energy costs, added to the comfort of employees working in the warehouse, and is environmentally friendly.

Larger economic/environmental issue

Cool roofing offers a solution for metropolitan areas searching for ways to control the demand, cost, and availability of electricity. 

Cool Roof Economics 

Cool Roofs are coated to extend the lifespan of roofs. This means taking into account the upfront costs as well as the ongoing savings and expenses incurred throughout the roof’s service life.

Extended Roof Lifetime

Roofs wear out and fail due to higher temperature, higher temperatures can speed up material degradation. Cool roofs maintain a lower average temperature, so, in principle, this can slow heat-related degradation.


Climate has the biggest impact on energy savings. Cool roofs achieve the greatest cooling savings in hot climates.

Comparative Study B/W Matrix Full Solution & Temporary Fixing



Matrix Cool System
Temporary Fixing

100 % seamless waterproofing technology

Waterproofing with joints which may fail in future

Eliminates thermal stress and protects roof from weathering

Failure of joints due to thermal stress

Up to 50 % roof temperature reduction

No temperature reduction and temperature accumulate.


Rust proof coating

Non-rust proof


Dirt pick-up resistant

Accumulation of dust causing roof damage


High reflective coating

Non-reflective coating


Eliminates 80% of the very destructive thermal shock due to heat, ageing and leaks.
Due to very destructive thermal shock; roof degradation, water leakage, thermal ageing from high heat loads etc will occur


Reduce Urban heat island effect

Formation of Urban heat island effect


Special treatment for gutter lines
The Gutters will get clogged and slope occurs in the reverse direction which requires rectifications and Waterproofing treatment.


3600 hydro thermal protection

No protection


110 SRI

Average of 40 SRI

85 % UV reflectance

Subject to energy absorption

Saturday, February 9, 2019



Comparative Study


Membrane Roofing VS Matrix Cool Roofing



Membrane Roofing                                   Matrix Combo Roofing System

Ø  Dead Load – About 12 Kg / M 2                                               Maximum Dead Load 700 grams / M2

Ø  High VOC level > 70                                                         Low VOC Level < 0.1

Ø  Highly Inflammable                                                        Class A Fire Retardant

Ø  No UV Resistance                                                             85 % UV Resistance

Ø  Non- Compatible for Direct UV Exposure                 Compatible for Direct UV Exposure

Ø  Needs to be Protected by Filling                                  Foot Traffic allowed

Ø  Still Chances of Failure                                                    10 years of Warranty

Ø  Energy Usage Remains same                                         40 % savings on your AC

Waterproofing in UAE : What makes Matrix Bldg different.

Waterproofing in UAE: What makes Matrix Bldg different When it comes to roofing solutions, Matrix is not just another company in the busines...